Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

What all do I need-replacing control arm stay bushings. 700

uid 925's pic
posted by  mike w. on  Tue Apr 30 03:50 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 13 14:27 CST 2001
[RELATED]

Lawrence:

Yes, you need four bushings, two per side There is a metal sleeve that connects them. You can re-use the washers if your old ones aren't split (never seen this but I understand it happens). I'd lean toward getting polyurethane bushings for the sake of longevity. IPD sells a kit for around $69 which includes the four bushings, two metal sleeves and new bolts, and there was a "tech tip" discussion with illustrations in their Fall/Winter catalog; pretty straightforward job. GAPA regularly sells just the poly bushings and the sleeves on Ebay for around $40.
--
Mike W., four 240s, a 740T and a 940T, Largo, FL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What all do I need-replacing control arm stay bushings. [700]
posted by  Lawrence  on Mon Apr 29 16:09 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.