Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2006

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Interesting wheel torque question

posted by  nyroguls on  Thu Jan 31 16:20 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Sep 21 12:35 CST 2001
[RELATED]

I'm going to be using spacers to install 850 wheels onto my 740T. Now, I was reading the FAQ. I know the torque specs on the 740 wheels is around 67 ft-lbs, but in the FAQ it says the 850 is 80-something. The spacer is not an adapter; it is going to fit to the hub via the original lugnuts. To install the 850 wheels the spacer accepts 850 wheel bolts. So, do I torque the spacer to the hub at 67 and then the wheels to the spacer at 80? Or should I do 67 (or 80) for both. This seems complicated for my Polish brain...

Roguls
New York, USA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Interesting wheel torque question
posted by  nyroguls  on Thu Jan 31 16:20 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.