Volvo RWD ALL Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 3/2002 ALL INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: B230F Heads - All the same? ALL 1989

The turbo heads have sodium filled (exhaust?) valves for heat dissipation. True of the B21/23 heads (160, 398) and of the B230 (405, 530 castings).

I do not think the SCP (small coolant passage) BCP difference is an issue with the B230FT. The SCP hangs on to the headgasket much better and is more desirable in the 398 casting series. All 160's are BCP. I think all 530 are SCP, not sure if ALL 405 are SCP.

There can be differences in the sensor positions and threadings as well as a minor change in the porting area as I recall and of course the K-jet heads have injector ports whereas the LH heads do not but basically the heads for any of the red engines are remarkabley similar.

Most of this latter is of course beyond your original question.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230F Heads - All the same? [ALL][1989]
posted by  someone claiming to be Brad  on Fri Dec 8 03:44 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.