Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2010 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: testing ignition system 700 85

posted by  someone claiming to be Isaac Babcock on  Thu Sep 27 10:52 CST 2001 [RELATED]

If it's at all like my '83 240... Unplug the connector to the distributor. There should be 3 pins in it. Run a jumper wire or paperclip across the B and C terminals on the harness side of the connector. There should be a spark. If so, check for voltage on the A terminal. If there is voltage there, the hall sensor is probably bad. Good luck.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New testing ignition system [700][85]
posted by  someone claiming to be mike reilly  on Thu Sep 27 04:53 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.