Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: dead in the water. wiring, timing belt? 200 85

posted by  someone claiming to be wbainlookalike on  Fri Nov 24 06:57 CST 2000 [RELATED]

You have the correct year for a bad wiring harness. Check the wires at the ground points at the intake manifold. Check the wire clipped onto a small sensor under the intake manifold runner to cyl 1 and 2. If the insulation is crumbling, this might be your problem. My 744 had a bad harness but would still run, how I don't know. The harness can be rewired, but the old one must come off first, all the wires replaced with the correct size wires and reinstalled. New ones are expensive and available ffrom IPD. let us know.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New dead in the water. wiring, timing belt? [200][85]
posted by  someone claiming to be cynthia  on Fri Nov 24 03:45 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.