Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2021 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pulls to the left when breaking 900

posted by  Metallo on  Sun Mar 9 10:54 CST 2025
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Feb 29 21:03 CST 2012
[RELATED]

Hi Dave,

There is no difference between the two part numbers, also according to FCP.

Skandix makes this statement for 6819057:
For export models with an aluminum wishbone (USA). Can be installed with steel suspension arms as an enhanced alternative for European vehicles.

I measured the length of the metal core in both, it is identical: 25mm

In the meantime I have good news! The metal part of the old bushing solidified with the housing cone, but I managed to remove both layers on the back and front side, some further cleaning and the bushings now fit in!

Now, no more "groove" in the center core,it is as it should be.

Look at this image, isn't that unbelievable?

https://postimg.cc/K4n1zWn1

Alex






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pulls to the left when breaking [900]
posted by  Metallo  on Sat Dec 21 09:37 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.