Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2008 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuse Solution 1800

posted by  planetman on  Mon Feb 26 21:51 CST 2018
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello Dave,

I have always hated the glass fuses with pointy ends as they don't seat in the holders as well and are more likely to fall out than the old school ceramic fuses.

You should be able to get your replacement fuse holder to work, but in case you didn't notice, the original wiring doesn't have 12 wires for the supply side so you are going to have to add jumpers. And on the other side of the fuse, there are multiple wires attached to several single points, so you are going to had to add jumpers there too.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuse Solution [1800]
posted by  Dave B subscriber  on Mon Feb 26 20:46 CST 2018 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.