Volvo RWD 900 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 4/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rack Replacement...Koyo conundrum 900 1993

posted by  Onkel Udo II on  Mon Sep 29 18:48 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:50 CST 2014
[RELATED]

I was hoping someone...anyone...would catch that. Thanks for the chuckle.

Yeah, I had already doen the magic elixir wire brush to good metal, heat (propane torch only), douse in penetrating oil, tap liberally as it cools with a ball peen hammer. Rinse, repeat for 3 seperate .

This may be the first time I admit defeat. The ends may have been unmoved since new and spent 1995 through 2012 in the Milwaukee suburbs. It may be that even if I can get it to move (bigger vice, Oxy/Acy torch and my 24" pipe wrench with a cheater) I would be a case of good Belgian beer the tie-rod would give way first on one or both.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rack Replacement...Koyo conundrum [900][1993]
posted by  Onkel Udo II subscriber  on Sun Sep 28 17:29 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.