|
Could you use a press or puller to separate the outer tie rods from the Pitman arms?
I'd used a lever method using a breaker bar with the end under the A-arm and over the steering rack link close to the outer tie rod. Use a three-pound hammer evenly on the outside flat surface of the Pitman arm.
You broke your vice? A real vice or a Harbor Freight vice?
Had not failed me with the rustiest of Volvo like in Salty Winters Midwest Archy City with the Whit Castles, Cardinals, and John. D. McGurks at 12th and Russell in Soulard.
cheers,
MacDuffy's Tavern.
--
Near Canada. Or better is Norway.
|