Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ball joint replacement problem 200

posted by  posaune on  Sat May 17 19:56 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed May 28 18:57 CST 2014
[RELATED]

Hi all,

I just changed one (driver's side) ball joint on my '93 240. I've done this job countless times before and it has never changed alignment, but this time my steering is off about 75 degrees(!) Are there different ball joints available? The replacement is from my parts stash, but it was bought for a '92 or '93 and says "all 240 w/ pwr steering" on the box. It is a Meyle, made in Germany. The two looked similar when I had them side by side too.

Should I try a different part, try replacing both (I don't have another Meyle), look for other problems, or just get an alignment an not worry about it.

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ball joint replacement problem [200]
posted by  posaune  on Sat May 17 19:56 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.