Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2009 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cruise Control not working after replacing shifter 900 1993

posted by  jchonig on  Sat Feb 18 10:41 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 8 13:58 CST 2014
[RELATED]

I replaced the whole shifter assembly in mh '93 940 a while back. The only one I could find with a decent knob was from a '94 940 which had a different wiring harness. So I took it apart and used the electrical parts from the '93 and knob from the '94.

After installing it, I find that the cruise control does not work. It is not the fuse because that also controls the overdrive, which is working.

I'm guessing that one of the connections is not good, or I bumped something while putting it back together. Before I take it apart, anyone have any advice for me?

Thanks.

Jeff





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cruise Control not working after replacing shifter [900][1993]
posted by  jchonig  on Sat Feb 18 10:41 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.