Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Coil wire 200 1989

posted by  B0RK ^3 on  Wed Jan 26 09:32 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 15 18:09 CST 2014
[RELATED]

The ignition coil wire (brand new, Bougicord) got stretched out on a generic ignition coil that some one previously put in before the car was bought. Wire, Cap, coil and plugs were all generic....So basically, I did a major tune up, sans the ignition coil... With everything OE.
I've since replaced the ignition coil with an OE Volvo Bosch out of a 91ish?.. 245 from a boneyard... But, because the new wire had some time on the generic coil, it now has gotten stretched out, and there is some slack around the coil/coil wire ,connection and this kinda worries me, because every other boot connection is tight, such as around the plugs, and on the distributer cap.
So what's a good fix?.... replace the one wire?... ignore it?... electrical tape?
--
'89 245 DL B230 Manual






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Coil wire [200][1989]
posted by  B0RK ^3 subscriber  on Wed Jan 26 09:32 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.