Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1993 240 oil pressure test results and resolutions. 200 1993

posted by  fatadams on  Fri Jan 21 14:16 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 17 14:42 CST 2013
[RELATED]

Those oil pressure #s are ok. A higher viscosity oil would increase them a bit, but not a big deal. The oil pressure light should not be on more than half a second or so after startup. The light is sapposed to indicate NO oil pressure. 21 psi should be way plenty pressure to keep the light off. The sensor may be bad, you might try a new sensor or testing your old sensor using compressed air and a multimeter. Next guess would be an intermittent wiring problem, bad wire insulation common. You might try a test wire to the sensor and monitor this with a multimeter with eng running and then driving.
--
85 240






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1993 240 oil pressure test results and resolutions. [200][1993]
posted by  Tico subscriber  on Fri Jan 21 09:54 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.