Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Shocks

posted by  Herb Goltz on  Wed Feb 24 12:46 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:23 CST 2014
[RELATED]

If you are lucky, you will be able to find the seam in the sleeve and you can drive a cold chisel into it to spread it a bit and get some P'blaster in there. In the past I've had to resort to heat, a drift and a very large hammer. Others have described cutting through the sleeve and bolt and replacing them.

When reassembling, use plenty of antiseize.

Good luck!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Shocks
posted by  B0RK ^3 subscriber  on Wed Feb 24 10:39 CST 2010 >
  • New Shocks
    posted by  Herb Goltz  on Wed Feb 24 12:46 CST 2010 >
  • New Shocks
    posted by  rstarkie subscriber  on Wed Feb 24 14:08 CST 2010 >
  • New Shocks
    posted by  B0RK ^3 subscriber  on Sun Feb 28 14:46 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.