Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flasher switch problem 200

posted by  sasjzl on  Fri Oct 2 07:12 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 3 17:24 CST 2014
[RELATED]

I think I might have found another clue to this no turn signal, no flashers deal.
I found that the toggle switch for the emergency flashers is missing parts as in I do not see how it could be working correctly. Could this keep my turn signals from working?

I tried jumping the wires that come into that switch hoping that I could simulate the 'normal' situation where the wires that are supposed to be connected for the turn signals to work but no flasher on, but the closest I can get is to get the idiot lights to light up.

These are the wires I see coming into that switch.

Blue/red
blue
white
yellow
green
green/white

I tried touching each wire with the blue/red, which I assume is power of some kind and I cannot remember which one it was but I could only get the idiot lights and a bell ringing.

Can anyone tell me what wires should be connected in the 'normal' hazard flashers OFF situation?

Is this flasher switch the same on all 240's and possibly other models?

Thanks very much,
Jim Lee






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turn signals not working [200]
posted by  sasjzl  on Fri Oct 2 05:06 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.