Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Installing Euro HL's w/fogs 900 1995

I scored a set of headlights with factory fogs to go on my '95 944. They are off a Euro car (if that makes an installation difference).

The outer end of the HL assembly bolts right into the two holes in the fender. However, I find no holes to which to mount the inner end of the HL assembly. The existing HL assembly is fitted in with one or two screws that go through a mounting flange of some sort that bolts to the core support, and then they screw into the inner end of the HL assembly. However, that flange piece has to come out, since the HL w/fogs assembly is 3-4 inches longer than the version w/no fogs. I don't see a place to simply move that flange piece toward the center of the car and mount it there, so I'm left with nothing to which to mount the inner end of the headlight assembly.

Are there more pieces I'm going to need to install these headlamps ? If so, anybody got a line on them ? I'd really like to get these into my 940......

I also got the grille off the Euro car. Any new pieces going to be necessary for that, or do you just move existing mounting pieces at the top ?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing Euro HL's w/fogs [900][1995]
posted by  timc subscriber  on Mon Jul 20 01:51 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.