Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Wrong PCD, pros and cons of conversion of bolt pattern 200 1987

uid 15548's pic
posted by  volvo245gti on  Mon Dec 22 02:13 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 13 16:32 CST 2014
[RELATED]

Re-drilling the hubs has been done before. 5X114.3 can be done safely according to those who have done it although the rears may require welding up of the old holes as the axle retainer bolt access holes will cause issues.. If you're going to re-drill the hubs, get a longer stud and some 10mm spacers to correct the offset...

If you decide against this, I'd love a set of Minilites for my 123GT...
--
Dale






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wrong PCD, pros and cons of conversion of bolt pattern [200][1987]
posted by  dindo  on Sun Dec 21 23:28 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.