Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2001

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

SAVE

Which O2 sensor to buy

posted by Farm Boy on Wed Nov 12 18:02 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Mon Oct 28 07:35 CST 2013

[RELATED]

The instructions do say to crimp rather than solder, but that has never quite made sense to me. I have always bought OEM so I never had to face that decision.

I have never bought at Walker. I used to use Bosch, but have switched to Denso for my most recent replacements. Actually, the box does not say Denso. It is a subsidiary of Denso.

My 91 drove me nuts a year or so ago with an intermittant power feed to the oxygen sensor heater. Always worked when I checked it. Took forever to find the problem. I ended up running a new wire from the fuse box to the sensor plug. No more problems.

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Which O2 sensor to buy
posted by J.R. on Sun Nov 9 14:52 CST 2008 >

Which O2 sensor to buy
posted by mcduck subscriber on Mon Nov 10 03:57 CST 2008 > V
- Which O2 sensor to buy
  posted by rstarkie subscriber on Mon Nov 10 15:25 CST 2008 > V
  - Which O2 sensor to buy
    posted by mcduck subscriber on Thu Nov 13 14:29 CST 2008 > V
    - Which O2 sensor to buy
      posted by rstarkie subscriber on Thu Nov 13 15:32 CST 2008 > V

Which O2 sensor to buy
posted by 7 volvofamily on Mon Nov 10 14:05 CST 2008 > V
- Which O2 sensor to buy
  posted by rstarkie subscriber on Mon Nov 10 14:15 CST 2008 > V
- Which O2 sensor to buy
  posted by J.R. on Mon Nov 10 14:56 CST 2008 > V
  - I disagree about soldering O2 sensor signal wires.
    posted by lucid subscriber on Wed Nov 12 00:15 CST 2008 > V
    - Soldering is acceptable for my application
      posted by J.R. on Wed Nov 12 14:24 CST 2008 > V
      - IMO, soldering is unneeded overkill--with risks
        posted by lucid subscriber on Thu Nov 13 08:00 CST 2008 > V
        
        More info from Walker Prodcuts Engineering - Ref Air and Soldering
        posted by J.R. on Fri Nov 14 01:59 CST 2008 > V
        
        More info from Walker Prodcuts Engineering - Ref Air and Soldering
        posted by Art Benstein subscriber on Mon Nov 17 13:15 CST 2008 > V
    - I disagree about soldering O2 sensor signal wires.
      posted by someone claiming to be Wyatt on Thu Aug 11 10:05 CST 2022 > V
      - I disagree about soldering O2 sensor signal wires.
        posted by Art Benstein subscriber on Thu Aug 11 12:09 CST 2022 > V
  - Which O2 sensor to buy
    posted by mcduck subscriber on Thu Nov 13 14:37 CST 2008 > V

Which O2 sensor to buy
posted by Farm Boy on Wed Nov 12 18:02 CST 2008 > V
- Which O2 sensor to buy
  posted by J.R. on Thu Nov 13 00:28 CST 2008 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD Forum

Which O2 sensor to buy