Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

TIMING BELT 200 1993

posted by  pageda on  Sun Aug 10 08:25 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

All three need to be on the timing marks, the camshaft has to be on the mark with both valves for #1 cylinder closed. Open the oil filler cap and verify cam lobes on #1 cylinder are up indicating the valves are closed. If not rotate the cam 360 degrees and check again. See FAQ's below. Dan

http://www.brickboard.com/FAQ/700-900/B230FTimingBeltAlignment.htm






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New TIMING BELT [200][1993]
posted by  chudar  on Sun Aug 10 07:59 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.