Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

fitting a PCV system to a B18 block.. 120-130

posted by  Phil S. on  Sun Nov 11 11:46 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

There's an oil trap teardrop for later B18s that's a direct replacement for the road draft tube, and one from an early B20 would also fit (late B20 traps have a larger stub that won't fit into the hole in the block).

No flame trap screen is used in the trap if you use a PCV valve from the trap to the manifold -- instead, there's mesh in the oil filler cap, which gets vented to the front air filter.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New fitting a PCV system to a B18 block.. [120-130]
posted by  buboes  on Sun Nov 11 10:45 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.