Hi,
I have resently poured too much oil on the to engine (during oil change) The result is that the flame trap has been blocked and that oil has been forced into the "AMM to Throttel body"-hose ... I could practically soak a cloth with oil.
Fortunately the seals of the engine seem not to have been damages, most likely as I realised the error quite quickly - ran less than 200 miles
I have cleaned the flame trap and assosiated hoses. Moreover I have cleaned the "AMM to Throttel body"-hose and the IAC. It seams that I should clean the Throttle body as I can see deposits on its surfaces.
Should I clean the injection manifold also ??
I have poured injector cleaner into the petrol twice with good effect. This has removed the acceleration hesitation.
Can the AMM have been damaged (I see oil deposits on the lower third of the downstream filter of the AMM), If so can I repair/clean it?
Thank you in advance
Malnitz
|