Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

940 No Start -- It ain't over till its over.

posted by  Danada80G on  Thu Jan 25 06:55 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 6 20:03 CST 2007
[RELATED]

Bruce,
I tried it with the ring on the sender first and the outside ring was hanging up on the edge of the tank. I then backed out and tried putting the seal in the tank with the seals outside ring just past the edge of the tank. The WD40 didn't seem very slick in the cold and the sender just went in so far and stopped. Couldn't budge it. I'm going to try again tonight.

I checked out the place you mentioned before I bought the pump. Their web price was (and is) $184 on a pump with no part number. I was concerned about getting the wrong pump since IPD told me they had no documentation on a single in-tank pump for a 940. I've normally bought mail order from IPD. I will definitely save the link for future reference.

Thanks
Roger






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940 No Start -- It ain't over till its over.
posted by  Danada80G  on Wed Jan 24 17:05 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.