Volvo RWD 140-160 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Steel wheel offset? 140-160

posted by  Hagar on  Fri Nov 24 18:12 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 22:42 CST 2008
[RELATED]

OK ....

The steel wheels I have (from an Australian delivered 142, 1974 model) are stamped 684000 / Volvo Import / 5x15x40

The "backspace" on these wheels is 118-119mm from mounting face to edge of rim.

For road use on my '74 144, I run the 10 spoke "Sirius" rims (off a 740) which are 6x15x25, using 205/65 tyres - I also have some "tracking" problems, and need to get a little more toe-in on the front, I think.

For rally use, I run 242GT "Virgo" rims (6x15x20) with 195/65 Silverstone rally tyres.

Have had no rubbling troubles with any of the 6" alloy rims.

I also have a couple of steel rims off a late-model 164 in back of the shed (somewhere!) that are 5.5x15 with (I think) 20 or 25mm offset ... can't get at them to measure the backspacing though !

Hope this helps ....






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Steel wheel offset? [140-160]
posted by  imorgan202  on Thu Nov 23 03:42 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.