Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CTS or Temp sensor replacement- no coolant drain method 700

posted by  Rolyak on  Thu Aug 31 09:23 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 08:03 CST 2014
[RELATED]

I hated the idea of draining the coolant just to replace the CTS so this is what I came up with. Not really a new method but hadn't used it for years

Separate the bleed line from the reservoir to the radiator. Plug off the fitting at the radiator, clear the line of coolant going to the reservoir and apply about 10"HG with a Mity Vac or similar tool. That's probably the maximum as the cap will vent about 10"HG.

Have the sensor already loosened so you can change it quickly with your fingers. Finish the job,snug it down, sorry, don't know the torque specs.

Never lost a drop! Just make sure to work fast!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.