Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Broken Neck (long) 120-130

posted by  Ron Kwas on  Thu Jul 13 23:52 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:03 CST 2014
[RELATED]

Joe;

Radiators are copper/brass so you can simply solder them...using same plumbing equipment you use for soldering/sweating copper pipes...clean the area well with wire brush/sandpaper/solvent and apply fluxpaste...its works pretty well...I don't think you will need that welder friend...a burzomatic torch works just dandy...if you've ever soldered copper pipes, there's absolutely no reason not to go to work on your rad! Also check/solder sideplates while your at it...they like to come unsoldered from vibration...

Cheers





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Broken Neck (long) [120-130]
posted by  jmenacker subscriber  on Thu Jul 13 22:08 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.