The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Starter motor will not engage from ignition switch 700 1989

posted by  sjs314 on  Sat May 14 06:07 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 10 21:53 CST 2011
[RELATED]

Based on the other replies it appears you should be looking for a blue green wire on the engine compartment wiring harness since that matches the solenoid lead. And it sounds like the service socket has a pink wire (not blue green and blue) and is located by the left front fender. Did you get continuity between any of these points (i.e. service socket or harness plugs) and the solenoid lead? If not then the wire is broken in the harness. You should not be getting 12V at the #III position for the lead you tested if it is the service socket; that would mean that something is amiss with the ignition switch.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.