The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

DIY Wheel Alignment: How is Toe-In measured ? 200 1985

Thanks for the response Bob.

I'm having trouble figuring out why the pins need to be dead-center of the tread to get an accurate measurement:

Since I'm leaving the pins in while rolling backward, and then measuring the difference in the 2 measurements - shouldn't it make no difference where the pins are ? If one pin is 10 mm away from the center, that pin would be 10 mm 'off' in both measurements, so the difference would still be the same. Or am I missing something...

My big problem is figuring out what the 'correct' difference should be, as I'm not sure of how the Volvo-Spec measurements are made. Any ideas ? (see specs below)

Volvo Specs: Toe-in...
- measured on the wheel rim: 5/64" +/- 1/64" (2 mm +/- 0.5 mm)
- tire sides: 3/32" +/- 1/32" (2.5 mm +/- 1 mm)

Thanks again !

Noel






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.