The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Jumking the whole heater fan setup and starting fresh! 444-544

posted by  rayjanj on  Tue May 3 03:24 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:24 CST 2014
[RELATED]

Lots of effort. I just got my new (old) squirrel cage from Jim and drilled out the shaft hole to fit my 3 speed 1987 S10 blower motor. Put a small piece of 1/4" plywood down in the housing hole and set the squirrel cage down in position. It rests on the plywood which gave me plenty of clearance then measured from the housings motor mounting face to the bottom of the S10 mounting flange. Made me a plywood spacer, removed the plywood from the housing hole and primed and painted the new spacer and now have a relatively quiet fan.

Best
Ray J.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.