The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rear Brake Cylinder Leaking 120-130

This job is pretty straightforward, except for stuck hubs and rusty components. A couple of things the manual might not cover. First, block up the brake pedal with a piece of wood so it doesn't descend to the floor and gush out a bunch of brake fluid. Second, you should take this opportunity to flush out all the old brake fluid and put new in. Unless that has been done in the last couple of years the fluid is likely full of water and discolored. Finally, only do one side at a time so you can look at the other side for reference. The procedure is dead simple: adjust in the shoes to provide clearance for the drums, pull the hub (taken the precautions mentioned earlier), remove old parts, replace with new, re-install the hub, re-adjust the shoes. With rust and lots of unknowns, this can take anywhere from a couple of hours to days of work!

Tim
'72 1800 ES
'90 240






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.