The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Removal of crankshaft gear 900 1994

posted by  Rule 308 on  Wed Apr 27 03:51 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 8 09:20 CST 2012
[RELATED]

You might have to tap the face of it with a hammer a couple of times to both loosen it a straighten it. There is just enough slop in the fit that sometimes they get a little crocked and they won't slide right off. When it is straight it will slide right off. If it does not just tap it on the face from one side to the other until it is free and straight and then it just pulls off. Make sure that you put it on with the little nub towards the outside and align the tooth with the slot on the crank, install the shields correctly (inner and outer) otherwise it is pretty much fool proof. What is wrong with the old one that you are replacing it and are you going to do the seals while you are in there?

Mark






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.