The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rebuild myself or replace the BRAKE master cly 200

My parts guy supplies a rebuild kit for the MC $12.00, or a new one for $40.00. I have rebuilt a couple of MC in the past, one honed up nice but didn"t last more than a year, ther other didn't need honing and lasted longer than I had the car (a few years at least). I depends on the situ. maybe if you have access to the kit and can afford a little down time on the car, pull the MC, disassemble, and if the bore is good rebuild. It's more of a hobby kind of thing as the MC is pretty cheap new, but also it's satisfying too. Make sure you bench bleed the MC as it makes it possible to install the MC without breaking off teh caliper bleeds as you try to bleed them, I just back up the front cals pistons a bit after the MC is plumbed in. Re: tools, except for the hone thing nothing special, snapring pliers etc...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.