The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

960 Check Engine/Idle Surge 900

Check the FAQ's, the procedure is listed there. The DTC (2 small black boxes) are located on the driver's side at the top, rear of the strut tower. Take the cover off A, insert the ground pin into slot (A)2, turn the key to on (do not start), the red light should be lit on the DTC, press it for at leat 1 sec but less than 3, read the codes. Repeat in case there are more than 1 code. Press and hold for at least 5 seconds, the red light should come back on, press and hold again for 5 seconds....this will clear the engine codes.

the codes come across as a series of light flashes......

* * ..............* * * *................. * would be code 241
--
1998 S90 062,700 1995 964 142,100






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.