The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

calling all guys for help 200

The big stepped flywheel for a later model M47 equipped 240 non-turbo is basically the same (except for the CPS holes) whether from an intercooled (84 1/2-85) 24xTi or from any 740/760T. However the bellhousing crank position sensor requires the flywheel version with the peripheral holes, so that means later 240 ('89-on) or 700 or 700T (89 or 90-on?) only. Kind of rare, for a Volvo part. The bellhousing is the same as far as I can tell, except for the big cutout for the sensor. I have several spare bell housings (attached to M47's) but only one sensor compatible flywheel, for my own future 245SE conversion. I have another for the GT getting the B21FT, and that one has no holes. Each cost me $17, an hour under the car and a few contusions and lacerations. Happy to pull you one if and when I see another. Bell housing, no problem.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.