The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Coil Failure? 200 1982

Trev's suggestion was excellent. Look through the oil fill cap and make sure that the cam is rotating when you crank the car, or better yet, pull off the distributor cap and watch the rotor to be sure it turns. I don't recall what the distributor drives off of, but I think that it is an idler shaft that is cam-belt-driven. If so, failed timing belt would mean no distributor rotation and no spark signal.

Low-probability - there is also probably a roll key that locks the drive gear to the distributor shaft. I saw a V-6 Chevy loose its roll key once. The mechanic (who worked in the bay opposite mine) almost went crazy trying to figure out what was wrong.

If both valves happen to be stopped in the closed position on the #1 cylinder, you would hear air rushing out (and in) through the open spark plug hole when you were cranking.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.