The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

86 245DL Vacuum Hose Question 200

The emissions test here in Harris County (Houston) requires that the pre-heat hose be connected. If your PH hose is hooked up and the thermostat inside the air box is shot, then you are feeding the AMM a constant diet of HEATED air, which can cause some if not all of your symptoms, and ultimately AMM failure.

Pull the PH hose off the exhaust manifold heat shield and see if there's any difference.

Another item is the large air hose from the AMM to the throttle body. Both my 244 B230F have developed a hole in the bottom side on one of the sticking-out corrugations. I was not able to find the hole but when I replaced the air hose, there it was - big enough to mess things up.

The smaller vacuum hose used in the PCV system is a special oil-resistant type, maybe others are, too.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.