The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

very rough running at cold start 200 1986

posted by  lenny on  Wed Jan 29 17:51 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just replaced that, fun to get at, coolent temp sensor, use a 3/4 or I think 19mm 1/2" socket becouse the 1/2" is a bit longer than 3/8 so it just fits over the sensor, have that attached to a wiggly adaptor and aprrox. a 12" extension and it will go in through that hole you are using to look in at it just left of the input hose from AMM it will come out fine that way. Iv'e got rough idle on my 91 245 and I replaced the original fuel pressure regulator and the temp sensor and then it started and the idle is great but the real test will be in the morning.

good luck, lenny






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.