The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Sunroof vent position 700 88

After looking at the motor and playing with the switch on the dash, I found out that the motor has been miswired whole time since the car was made. The wires were set backwards so that the car was opening the sun roof when I was actually pressing the close button. Anyway, I took out the motor, rewired the thing and now it works fine. Only problem is that it doesn't close the roof all the way when I go to close it. Barely stick open, just enough to prevent it from shutting tight when I make it come down from the vent position. I'll tinker with it and solve that. Also, is there suppose to be anything that keeps the small rectangluar piece of roofing inside the car up? The roofing just hangs there and you can't get any air when its open to vent. Oh, well. Thanks a bunch for the help on the motor.







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.