The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: B230F Head removal 700 1987

posted by  someone claiming to be bob on  Mon Dec 11 17:32 CST 2000 [RELATED]

Head bolts are 14mm. Use a good 6 point socket. All manifold nuts are 13mm. Support bracket for intake are 12mm. You will need to remove the upper timing cover to remove/cut the timing belt. Timing cover bolts are 10 and 12. The water pump pulley has to come off to get the timing cover off. 10mm nuts. Unless the heater hoses look new, cut em. otherwise unclamp and keep em. oh yeah, valve cover, 10mm. I've found the best tool for the intake nuts is a 1/4 drive ratchet, extention, and 13mm swivel socket.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.