The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Want to replace motor mounts. HELP!! 700 1989

posted by  someone claiming to be Jeremy on  Sat Nov 11 16:28 CST 2000 [RELATED]

Erik,

I just replaced the mounts on my 740 turbo wagon last tuesday. It is a piece of cake. I put the car on ramps, took off the lower cover/pan, removed the three nuts on the lower bracket then the top nut on the mount.

The engine was supported with a floor jack cusioned with some foam on the pan at the drain plug. After eveything was loose just raise it slowly until you can remove the mount. I used about 20" of extention to access the nuts from the top and a box wrench for the ones on the bottom. I did one side at a time. The side buried under the turbo was actually eaiser to do than the one out in the open!

Good luck





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.