The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

time for a valve job ? 120-130 1967

Since pulling the head is not a real big deal with these 4 bangers, you could do that and then have the valve seats cleaned and valves inspected. Checking the rings and bore at the same time. That will give you piece of mind and something to do :>)

There is a mechanic in Wis who is selling PV parts on Craigslist once in a while, I believe his name is Rob and did a lot of work on your car. Then again, I never met the man and don't know for sure. He would remember C.A.

New door seals will be a nice plus. As would insulation under the hood and inside the firewall.

I wouldn't use 40W, the RMS really only leaks from the top half due to being parked for 7 months every year. You could pull the tranny/clutch and replace the seal.

I always attributed the black tailpipe to the weber pulling too much vacuum from the PCV... Not blowby.
--
My back feels better when I sit in a Volvo seat






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.