The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel Question 200

The key being on does not run the pumps.

It has to be cranking first to close the relay to run the pumps. The crank sensor has that duty. It tell the ECU to close the relay. Does it start up quickly with just a twist of the key?

While at the flame trap site you can find out to run the pumps all by themselves using the fuse panel. Things are much more quieter that way!

If you find that you have no fuel issue "be suspicious" of the AMM. If it starts up fine, idles good but does it shuffles and stutters and acts like its coming up on a cam in the power band when it finally gets its act together?
Sometimes they start failing when their mixture range becomes unstable and twists up its output to the ECU! Then the jerky ride starts!
Just be suspicious, there can be other things.

Like a bad the crank sensor or engine coolant sensor and of course there is the infamous flaky/tired/old components in the ignition system trick!

Phil






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.