The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B20 block and head choice for performance build 120-130

No. Not all B20 heads are the same, and if performance and high compression along with the larger valves are important to you, the only one's to work with are the early B20E heads and the one and ONLY US carb head that had the bigger, same size valves used on all the E/F heads as well as 10:1 compression is the '72 (up to '75 in Canada and Europe) B20B head. This head was only used on US wagon models and came with the HIF6 carbs, as all other models came with FI as standard, and the wagon was opt FI.
If you take any of the later B20F heads w/larger valves, you would need to block off the injector ports and shave the head to up the compression, and do some porting to open up the flow. Just using a thinner head gasket is not enough to get it to 10:1 or greater.
--
'89 245 sportwagon, destroyed by hit & run driver, RIP. '04 V70 2.5 T Sportwagon, 12k mi and '91 245 5-speed, 209k mi, replaced the '89






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.