Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Final chapter intank pump story.... surprise ending 200 1989

posted by  rstarkie on  Mon Oct 11 06:33 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

Click here for the previous post on this problem.

Found that the plastic connector that is attached to the intank assembly had lost contact on the black wire that feeds the intank pump. When I broke it off I found corrosion in/under it. No need for me to bad mounth the ScanTech replacement pump installed last year- it was fine. Some soldering and silicone sealer and the pump is now functional. Thanks to all who responded.

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Final chapter intank pump story.... surprise ending [200][1989]
posted by  rstarkie subscriber  on Mon Oct 11 06:33 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.