Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 12/2000 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

checking CO with dwell Meter-How? 700 1986

posted by  someone claiming to be Ron Hawkins on  Wed Dec 13 12:00 CST 2000 [RELATED]

Thank you all for the advice on how to do this. Hook up the voltmeter to the green and white wire and to ground. Needle should sweep from 0 to 12 volts when all is right.

Mine stays steady at twelve volts and on occasion as I try to adjust the screw will sweep from 0 past twelve and then to 0 and twelve. very erratic. I am not using the most expesive voltmeter, any thoughts, Hope it won't be expensive, having just replaced my engine wiring harness.

thanking you all for any help.

Ron






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.