Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Crank pulley torque and paint 120-130 1967

posted by  KlausC on  Tue Oct 20 06:29 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:15 CST 2014
[RELATED]

With a little rope and PVC pipe for an extension, the bolt came right off so I can replace the felt seal.

Does the seal need to be oiled before inserting?

How much torque to use on the crank bolt?

As an aside, the pulley looks like it used to be painted red on the forward facing side. Should I repaint it? Will rustolium work?

Another aside, when I loosened the alternator tensioner bolt, I found that the alternator was loose. Would that have caused the noise/vibration at higher rpms? I guess I will find out soon enough :)

Thanks,

Klaus
--
Proud owner of a 1967 220S. If I had more room, I would have more Volvos.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Crank pulley torque and paint [120-130][1967]
posted by  KlausC subscriber  on Tue Oct 20 06:29 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.