Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Will a Bernzomatic work for broken off bolts???

posted by  Son Of Bonzo on  Mon Jul 27 07:04 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 23 15:39 CST 2014
[RELATED]

Hello there,
I'm working on the gf's 91 240 sedan with around 200k. Anyway I was replacing the water pump when one of the lower bolts broke off. Luckily there's enough to grab onto,(about 1cm , maybe a little more )poking out of the engine. I've tried PB, then AeroKroil overnite with out much luck. I then tried a propane torch on it.. nothing so far. I'm just wondering if the Bernzomatic brand will even get it hot enough to do anything. I really don't want to have to drill it if I don't have to. Any ideas, I'm also tapping it here and there to try and loosen it up.
Thanks
cp






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Will a Bernzomatic work for broken off bolts???
posted by  Son Of Bonzo  on Mon Jul 27 07:04 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.