Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2002 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cylinder Head Casting #'s 120-130

posted by  mario_e on  Mon May 30 15:51 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 17 06:43 CST 2008
[RELATED]

I have two B20 cylinder heads, one injection and one carb.

I'm curious if there is any online source for casting # identification. Just want to know a little more about them.

-Mario E.
Lawrence, KS








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Cylinder Head Casting #'s 120-130

    posted by  walrus3 on  Tue May 31 01:53 CST 2005
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Dec 2 14:20 CST 2013
    [RELATED]

    I don't think so but look at the edge of the head in the center above the
    manifold mounting surface. Is it contoured or sharp-edged on one or both
    sides of the center headbolt? Machined edge the whole way is the late F head
    which some say has the best ports. This one probably does not have the hole
    for the auxiliary air valve.
    --
    George Downs Bartlesville, Heart of the USA!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.