Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replacing Plastic Vacuum Lines 200

posted by  Yeedogga on  Mon May 30 15:27 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

HI all,
just a quickie, can i replace the cracked/damaged plastic vacuum hoses (coloured ones from intake mani, distributor etc, with rubber end bits) with normal rubber or silicone vacuum hose? Many of the old ones are dying, and im about to replace all the hoses- should i fork out $$$ for orignal volvo ones with the plastic or just use normal vac hose?
Thanks in advance,
Chris.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replacing Plastic Vacuum Lines [200]
posted by  Yeedogga  on Mon May 30 15:27 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.