Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: fuel pressure regulator replacement 200 88

posted by  someone claiming to be bob on  Tue Jul 31 18:18 CST 2001 [RELATED]

The fpr is on the front of the injector rail. Remove the vacuum hose. Loosen the clamp from the retorn line on the back side of fpr. If clamp screw is not accessible, try twisting the hose till you can reach the screw. Now remove the two screws that mount the fpr to the manifold. (10mm) pull the regulator off of the manifold and out of the fuel rail, remove the return line. Whole job should take 5 minutes.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 fuel pressure regulator replacement [200][88]
posted by  someone claiming to be Brenton  on Tue Jul 31 17:09 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.