Volvo RWD 200 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 6/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

factory cruise 200 1987

posted by  someone claiming to be alan montgomery on  Mon Nov 20 14:26 CST 2000 [RELATED]

Dear members:

Does anyone know where on the back of the dash cluster the wire goes to enable the cruise control to work? This is a factory unit. Could anyone supply a scan of the wiring diagram for this?

Greatful to all,

Alan H. Montgomery

2 240's wagon and sedan







  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Re: factory cruise 200 1987

    posted by  someone claiming to be Robert Wegrzen on  Mon Nov 20 15:25 CST 2000 [RELATED]

    Alan,

    I have the Volvo service manual for cruise control - TP 30866/2. After 1986 the electronic speedometer supplies the speed control signal to the orange wire on pin 6 on the cruise control control unit. Page 18 of the service manual shows speed signal coming from the U shaped connector next to the speedometer. If you trace this connection on the instrument cluster circuit board you will see that it comes through the VDO circuit card that controls the speedometer and directly from the IC on that board.

    Put the wrong wire on this connector and you will damage the speedometer/odometer circuit as many of us have learned.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.